Agco EDT Electronic Diagnostic Tool v1.124.23 [08.2023]

A.PayPal

B.Western Union

C.Bank Transfer(We can provide local bank accounts in Europe, the United Kingdom, the United States, Canada, Japan, South Korea and Australia and HongKong international bank account for you to pay)

D.WeChat Pay,Alipay

E.Virtual currency

* Program diagnostics agricultural machinery AGCO
* Challenger, Massey Ferguson, RoGator , SpraCoup etc.
* For the diagnosis requires AGCO CANUSB adapter without a program can be used as a base fault code data, and ways to solve them.
* Together with the program set EDTWinEEM3s for diagnostics of engines and other old machinery AGCO.

* WinEEM3 and WinEEM4 is an easy tool for the monitoring and adjustment program to SisuDiesel Electronic Control Unit (ECU). Programs can be used with EEM2, EEM3, EEM4 ECU. CAN bus used to communicate with ECU.

There is equipment for all regions:
* North America, Asia, Africa, South America, Eastern Europe, etc.

You can make full diagnostic, programming and troubleshoot problem of current 20  brands:

AGCO;
Amity;
AGCO Advanced Technology Solutions;
Challenger;
Concord;
FENDT;
FELLA;
GLEANER;
Laverda;
Massey Ferguson;
Perkins;
RoGator;
ISEKI;
LELY;
SISU Diesel;
SpraCoupe;
Sunflower;
TerraGator;
Valtra;
WHITE Planters.

Release Notes – 6/2/2021 – Update 2021.3

EDT NOTES:

EDT Version: 1.101.21103.808

Bug Fixes:

• Minor updates for diagnostics.

Vehicles Affected:

• Valtra: T-Series, N-Series, A-Series

Vehicle Version:

• 3.27

General:

• AC15.34, AC15.35, AC16.0 and AC19.34 removed from South America region

Diagnostics:

• 4WD page for N3 / T3 Versu and Direct facelift added
• Cruise pages added for EEM3 Versu and Direct
• PTO data flow diagram page added for N2 / T2 tractors
• PTO Sigma page added for N2 / T2 tractors

Calibrations:

• Powershuttle, Powershift and Clutch Pedal names standardized on calibration page

Diagnostic Tests:

• Diagnostic help file added for Visco Fan Test
• Forced Engine Torque Curve tool set visible under diagnostic test tab

Diagnostic Trouble Codes:

• Fault code descriptions updated

Plug-Ins:

• AG3000 v8.4, Fixed a bug with clearing the stored DTC codes
• PVED-CL v5.16, Fixed a problem with parameters write to the EEPROM

Vehicles Affected:

• Massey Ferguson: MF 6700S Stage 5 Series
• Massey Ferguson: MF 7700S Stage 5 Series

Vehicle Version:

• 2.7

General:

• Add an improved calibration procedure for WAS Center (Steering, Middle position)

Plug-Ins:

• New CEA-Guide content
  • Add VD03 V1.143 L26 version

• New ACM content
  • Add Ukraine as a selectable country code in the replacement process
  • Fix the read of hardware version in graphical surface for 411 devices
  • Improve the detection of hardware version
  • Update software V04.01.36
  • Improve some graphical surfaces

Software:

• New SRC14-34 software V5.49 for Dyna-VT models
  • Improve display of Memo A switch when Isobus function on lever is active in NT03 and tractor with T-Handle configuration
  • Fix a bug on the steering system
  • Fix delay to stop the PTO to be compliant with the regulation
  • Fix the measurement of effort on rear hitch

Vehicles Affected:

• Massey Ferguson: Global Series 4700-5700-6700
• Valtra: A100
• Valtra: AC51.5, AC52.5, AC53.5, AC54.5, AC55.5, AC56.5

Vehicle Version:

• 6.4

Software:

• New Continental software V2.09
  • Add some missing diagnostic signal for braking system
  • Fix a bug of the save of counter hours
  • Fix engine speed limitation during PTO clutch start phase
  • Support engine curve 2 for Brazilian tractors

• New Transmission ISC software V2.21.0
  • Improve smoothness of shuttling

• New Linkage software V1.31.0
  • Remove PTO alarm in stationary mode on non MR tractors

Vehicles Affected:

• Massey Ferguson: 6700R Series
• Valtra: A4Hitech Series

Vehicle Version:

• 6.4

Plug-Ins:

• New ACM content
  • Add Ukraine as a selectable country code in the replacement process
  • Fix the read of hardware version in graphical surface for 411 devices
  • Improve the detection of hardware version
  • Improve some graphical surfaces

Vehicles Affected:

• Challenger: MT600E with TMC Display
• Massey Ferguson: 8700 with Datatronic 5 Series
• Massey Ferguson: MF 8700S Series
• Valtra: S4 with SmartTouch Display Series

Vehicle Version:

• 5.60

General:

• Add an improved calibration procedure for WAS Center (Steering, Middle position)

Plug-Ins:

• New CEA-Guide content
  • Add VD03 V1.143 L26 version

• New ACM content
  • Add Ukraine as a selectable country code in the replacement process
  • Fix the read of hardware version in graphical surface for 411 devices
  • Improve the detection of hardware version
  • Update software V04.01.36
  • Improve some graphical surfaces

Software:

• New T4F engine software for models with new fuel tank (84AWF models – NA only)
  • Cold start improvements
  • Defrost timer improvement
• New SRC14-34 software V5.50 for MF and Challenger models
  • Fix failure of the Hall effect sensor to get engine speed value (X25) by reading the value from engine ECU (CAN frame)
  • Fix a bug on the steering system
  • Fix delay to stop the PTO to be compliant with the regulation
  • Fix the measurement of effort on rear hitch

Vehicles Affected:

• Fendt: IDEAL Combines
• Massey Ferguson: IDEAL Combines

Vehicle Version:

• 1.32

Software:

• GQS: 1.0.5.1266
• NT01:9.2.26
• AP Engine: 1.2.13 Rev.2 (All Regions)
• MAN Engine D3876LE125 for Western Europe, MY18, Class 9, with new temp. sensor rework
• MAN Engine D4276LE121, D4276LE122, Class 10

Vehicles Affected:

• Massey Ferguson: 1700 Series

Vehicle Version:

• 2.29

Software:

• Checksums for the 1700 engine flash have been corrected.

Vehicles Affected:

• Fendt: 4160V, 4180V, Rotana 130 F, Rotana 160 V, Rotana 180 V
• Lely: RP 130 F, RP 160 V, RP 180 V
• Massey Ferguson: RB 3130 F, RB 4160 V, RB 4180 V

Vehicle Version:

• 1.8

Software:

• New Software 2.29.5

Vehicles Affected:

• Fendt: Rotana 130 F, Rotana 160 V
• Lely: RPC 130 F, RPC 160 V
• Massey Ferguson: RB 3130 F Protec, RB 3160 V Protec

Vehicle Version:

• 1.6

Software:

• New Software 2.39.5

Vehicles Affected:

• Fendt: C-Series 2015: 5275CA, 5275CPLA, 6335CA, 6335CPLA
• Fendt: L-Series 2015: 5255L, 6275L
• Laverda: M300 Series 2015: M300A, M310A
• Laverda: M400 Series 2015: M400A, M400LCA, M400LCIA, M410A, M410LCA
• Massey Ferguson: ACTIVA S Series 2015: 7345S, 7347S
• Massey Ferguson: BETA Series 2015: 7360A, 7360PLA, 7370A, 7370PLA

Vehicle Version:

• 2.19

General:

• New software released:
  • EXT-LT Version: 1.69
  • NT01 Version: 6749
  • NT05 Version: 6749

Vehicles Affected:

• Challenger: 644
• Fendt: 5220E
• Laverda: M200
• Massey Ferguson: 7244

Vehicle Version:

• 4.2

General:

• M180 Stage V engine software: Version 6.1.1 Rev. 1
• 5185 E Stage V engine software: Version 6.1.1 Rev. 1
• 7340 Stage V engine software: Version 6.1.1 Rev. 1

Vehicles Affected:<